Philips Home Theater System W10162446A User Manual

Set up  
Connect  
1
2
Finding the viewing channel  
Connect the speakers and  
subwoofer  
Connect the various colored plugs from the speakers  
and subwoofer to the same colored jacks at the rear of  
the DVD system.  
Connect the DVD system to TV  
Placement  
Proper speakers system placement is important to  
ensure optimum sound performance.  
A
C
D
A
Television ( rear)  
A Press STANDBY ON on the DVD system.  
B Press SOURCE on the DVD system until “DISC”  
appears on the display panel.  
FRONT FRONT  
RIGHT LEFT  
FRONT  
CENTER  
C
D
A
C
B
DVD System (rear)  
A
C Turn on the TV. Use the TV’s remote control to  
D
DVD System (rear)  
select the correct viewing channel for the DVD  
system.  
B
You should see the blue DVD background on the  
TV.  
A Place the center speaker above or close to the TV.  
Note To search for the correct viewing channel,  
press the Channel Down button on the TV’s remote  
control repeatedly (or AV, SELECT, ° button) until  
you see the blue DVD background.  
REAR  
LEFT  
REAR  
RIGHT  
B Place the subwoofer on the floor, at least one meter  
A Use the supplied composite video cable to connect  
the CVBS jack on this DVD system to the VIDEO IN  
jack on your TV.  
away from the TV.  
SUB-  
WOOFER  
C Place the front speakers at equal disctances from the  
TV.  
B Plug in the power cable from the DVD system to an  
D Place the rear speakers at normal listening ear level.  
AC power outlet.  
Select the display language on the  
screen  
B
Note It is important to connect the DVD system  
directly to your TV.  
Connect the radio antennas  
Keep the antennas away from the electronic devices to  
prevent unwanted interference.  
B
A Press SETUP.  
The setup menu appears. Use WXTS keys on the  
remote control to navigate in the menu.  
Connect the audio from other  
device to DVD system (optional)  
Use the red and white audio cables to connect the  
AUX IN (R/L) jackts on this DVD system to the AUDIO  
output jacks on your Audio/Video device (for example,  
DVD recorder, VCR).  
E
B Highlight  
icon and press T. Move to  
in the  
menu and press X.  
B
C
AUDIO  
OUT  
DVD System (rear)  
A
AUDIO OUT  
C Move to { MENU LANG } in the menu and press X.  
D Use TS keys to select a language option in the  
b
A Connect the FM antenna to the FM jack. Extend the  
DVD System  
(rear)  
menu and press OK to confirm.  
wire and fix its end to the wall.  
E Press SETUP to exit.  
B Unfold the AM loop antenna and fix the claw into  
Note The language set here is only for the menus  
that are shown on the TV while operating this DVD  
system, not for the DVD disc menu.  
the slot.  
C Connect the AM loop antenna to the AM jack. Place  
the AM loop antenna on a shelf, or attach it to a  
stand or wall.  
Note Press TV/AUX/DI on the remote control to  
get the sound output from the speakers system when  
watching the TV program.  
There are various setup options (Audio Setup, Video  
Setup, Preference Setup) available on this DVD system.  
Refer to the user manual for more information.  
 

Peavey Musical Instrument Amplifier The Century User Manual
Philips Camcorder CAM100 User Manual
Philips CRT Television 14PT1573 User Manual
Philips DVD VCR Combo DVP 3055V User Manual
Philips Lawn Mower DTR210 User Manual
Philips MP3 Docking Station DS9800W User Manual
Pioneer Car Stereo System DEH 4400BT User Manual
Planar Car Video System PA1575R User Manual
Polaris Offroad Vehicle Trail Boss 330 User Manual
Polycom Telephone SX 2000 User Manual